Wintec Pro Stock Stirrup Straps - 766:31024679682130
Wintec Pro Stock Stirrup Straps - 767:31024679714898
Wintec Pro Stock Stirrup Straps - 766:31024679682130
Wintec Pro Stock Stirrup Straps - 767:31024679714898

Wintec Pro Stock Stirrup Straps

Recommended to be used with the Wintec Pro Stock saddle, the traditional 1 ¼ inch design with a sleeve enables you to buckle down near the stirrup iron for reduced bulk under your thigh.

Start with the sleeve
  1. Unfold the stirrup straps and keep the sleeve separate. 
  2. With both logos facing you, thread the pointed end of the stirrup straps through the sleeve, then push the sleeve all the way up to just underneath the buckle.
Now it's time to add your stirrup iron
  1. Thread the pointed end through the eye (the small hole at the top) of your stirrup iron with the logo facing downward.
  2. Keep pulling it through, all the way up through the sleeve and behind the buckle. 
  3. Once you have buckled your stirrup straps at your preferred length, pull the pointed end through the buckle and back down through the sleeve. Both logos should now be visible once more.
Getting the buckle down into position
  1. Hold the stirrup straps loosley, behind the buckle, as though your hand is a temporary stirrup bar. 
  2. Pull the buckle down toward your stirrup iron. The sleeve should now be snug against the iron with the buckle sitting just above the sleeve.
  3. You can either put the excess through the eye of your stirrup iron one more time, or you can fold it under the top of the stirrup iron, then tuck the remaining length back up through the sleeve to secure.
Now you're ready to attach the stirrup straps to your saddle and enjoy your ride! 

Find a retailer

Please contact us or your local retailer to check availability

  • How do I fit them?
    With both logos facing you, thread the pointed end through the sleeve and push the sleeve up to just under the buckle. Then take it through the eye of the iron, back up through the sleeve and buckle at your length.

    Where should the buckle sit?
    Pull the buckle down towards the iron so the sleeve sits snug against it with the buckle just above, then put the excess through the eye once more or tuck it back up through the sleeve.

    Which saddle and irons are they for?
    They are recommended for the Wintec Pro Stock and need a stirrup iron with a 1¼ inch eye.

  • Made to suit the Wintec Pro Stock, and they need a stirrup iron with a 1¼ inch eye. You set your length by buckling down near the iron, so the sleeve sits snug against it with the buckle just above.

    • Wipe off sweat and dirt after riding and let the straps dry naturally away from direct heat before you store them.
  • We take care with our photos, but the saddles and gear in our lifestyle shots won't always be the exact product on this page. Some are there to show off a feature, like being weatherproof or easy to clean.

    The product photos and description are the best guide to what you're buying. If you're not sure, just get in touch and we'll check for you.

Key features

  • Traditional 1¼ inch design with a sleeve
  • Buckles down near the stirrup iron, not under your thigh
  • Less bulk under your leg on a long day
  • Recommended for the Wintec Pro Stock

Looking after your stirrup straps

Wipe off sweat and dirt after riding and let the straps dry naturally away from direct heat before you store them.

Finding the right fit

Made to suit the Wintec Pro Stock, and they need a stirrup iron with a 1¼ inch eye. You set your length by buckling down near the iron, so the sleeve sits snug against it with the buckle just above.

Wintec Pro Stock Stirrup Straps

  • Traditional 1¼ inch design with a sleeve
  • Buckles down near the stirrup iron, not under your thigh
  • Less bulk under your leg on a long day
  • Recommended for the Wintec Pro Stock

Read more: Feel closer to the action with Wintec Webbers.