Wintec Pro Webbers
Size guide
To ensure you purchase the right length we recommend talking to your local saddle specialist who will assist you. As a comparison to Wintec stirrup straps, we have provided you with some information below to help you make a decision in choosing the right size Wintec Webbers for your saddle.
- Size 0/60 cm (shortest hole 38 cm to longest hole 53 cm). This size is most similar to 122 cm stirrup straps.
- Size 1/70 cm (shortest hole 48 cm to longest hole 63 cm). This size is most similar to 140 cm stirrup straps.
- Size 2/80 cm (shortest hole 58 cm to longest hole 74 cm) This size is most similar to 160 cm stirrup straps.
- Take the sleeve off then thread the looped end of your Wintec Webbers through the eye of your stirrup iron and replace the sleeve.
- Slide the loop of the Wintec Webbers over your stirrup bar. Ensure your Webbers buckle below your saddle flap to avoid wear.
-
To secure your stirrup iron in place follow the below steps and adjust as necessary until you have achieved your preferred length.
- Fold the T-shaped buckle end up, behind your stirrup iron and insert into the I shaped hole at your preferred length. Turn the buckle until your Wintec Webber is sitting flat, and the buckle is secure.
- Pull the sleeve down firmly to ensure the T-shaped buckle is covered to protect your tack and gear.
- To run-up your Webbers, remove the T-shaped buckle from the slot they have been secured into for riding and insert the buckle in the hole at the very top of the Wintec Webber. This is up very high near your stirrup bar and you may need to lift the skirt of your saddle to see it.
- Run the stirrup iron up the front of the Webber and tuck the folded Webber through the stirrup iron and pull down to secure.
Please contact us or your local retailer to check availability
-
How do they differ from Wintec Webbers?
They do everything Wintec Webbers do, with Equi-Suede on both the inside and the outside, so they match Wintec saddles that have Equi-Suede.How do I fit them?
Take the sleeve off, thread the looped end through the eye of your stirrup iron and replace the sleeve. Slide the loop over your stirrup bar so the Webbers buckle below your saddle flap.How do I run them up?
Put the T-shaped buckle in the hole at the very top of the Webber, near the stirrup bar. Run the iron up the front, then tuck the folded Webber through the iron and pull down. -
Webbers are sized in centimetres by overall length, and the inch figures are a conversion for reference only. Size 0, 60 cm/24", adjusts 38 to 53 cm (15 to 21 in) and is equivalent to a 120 cm/48" stirrup strap. Size 1, 70 cm/28", adjusts 48 to 63 cm (19 to 25 in) and is equivalent to a 140 cm/56" stirrup strap, and will fit about 2.5 cm shorter. Size 2, 80 cm/32", adjusts 58 to 74 cm (23 to 29.5 in) and is equivalent to a 160 cm/64" stirrup strap, and will fit longer. If you are not sure, your saddle fitter or stockist can help you choose.
-
- Wipe or rinse off sweat and dirt and let them dry naturally.
- A stiff bristle brush lifts dirt from the Equi-Suede and restores the nap, and Wintec Saddle Cleaner is there for a deeper clean.
-
We take care with our photos, but the saddles and gear in our lifestyle shots won't always be the exact product on this page. Some are there to show off a feature, like being weatherproof or easy to clean.
The product photos and description are the best guide to what you're buying. If you're not sure, just get in touch and we'll check for you.
Key features
- No buckles, so no lump under your thigh
- Webbing core for extra strength
- Equi-Suede on both the inside and the outside
- Equi-Suede interior protects your saddle flap from wear
- Matches Wintec saddles featuring Equi-Suede
Looking after it
Wipe or rinse off sweat and dirt and let them dry naturally.
A stiff bristle brush lifts dirt from the Equi-Suede and restores the nap, and Wintec Saddle Cleaner is there for a deeper clean.
Finding the right fit
Webbers are sized in centimetres by overall length, and the inch figures are a conversion for reference only. Size 0, 60 cm/24", adjusts 38 to 53 cm (15 to 21 in) and is equivalent to a 120 cm/48" stirrup strap. Size 1, 70 cm/28", adjusts 48 to 63 cm (19 to 25 in) and is equivalent to a 140 cm/56" stirrup strap, and will fit about 2.5 cm shorter. Size 2, 80 cm/32", adjusts 58 to 74 cm (23 to 29.5 in) and is equivalent to a 160 cm/64" stirrup strap, and will fit longer.
If you are not sure, your saddle fitter or stockist can help you choose.
Wintec Pro Webbers
If your saddle has Equi-Suede, these are the ones that match it.
Read more: Feel closer to the action with Wintec Webbers.